Why is there water in cracked waste tire oil?

The process of waste tire cracking oil is a thorough process, and every process point is linked and promoted each other, which requires our strict control. In this layer of watch, you can get good quality products: tire oil, carbon black and steel wire. Among them, the oil quantity and quality of cracked waste tire oil is the most concerned by refinery owners, and it is also the most susceptible to error, so it is necessary to avoid and test at the beginning. Recently, I saw some bosses put forward "Why is there water in cracked waste tire oil?" In fact, the answer to this question is very simple. Cracking waste tire oil contains about 1% of water is a normal phenomenon, once the water proportion is too much, may be caused by the following two reasons: first, because the waste tire before cracking raw materials wet, its own water content is large; The second reason is that the condensation system of the waste tire Cracking Equipment has broken, and the circulating cooling water has infiltrated. Let us start from these two points, analyze why there is water in cracked waste tire oil, and put forward the corresponding treatment method of tire cracked oil refinery wastewater.

Reason 1:

In view of the problem of wet tire raw materials, there are many reasons for wet, it may be that there is no good product quality inspection when raw materials are purchased, and it may be that there is no good storage of raw materials in rainy days, resulting in raw materials being rained, etc., or it may be that nearby pool water containers leak water, infiltrating tire raw materials and so on. No matter what kind of reason, we must adjust to avoid this phenomenon, do a good job of raw material purchase inspection, pre-feed inspection, dry space storage, etc., so that raw materials as far as possible in the dry without doping into the cracking furnace.

Reason 2:

Next, the second point, in view of the condensation system of waste tire cracking equipment, the problem of circulating cooling water penetration, what we have to do is to choose a good waste tire cracking equipment, find a manufacturer with excellent equipment quality, rich production experience and after-sales service in place to purchase. Because just like the internal organs of the human body need the supply and delivery of blood vessels to maintain the operation of the human body, the circulating cooling pipes and circulating cooling water in the process of cracking and condensing of waste tires are like blood vessels and keep storing energy for condensation, ensuring that the oil and gas of cracked waste tires are fully cooled in the condensing system. Once the circulation cooling pipeline is broken and damaged, not only can it not fully condense the cracked oil and gas, but a large amount of water will enter the oil tank with the pipeline and fuse with the tire oil to produce oily wastewater, at this time, it is necessary to "see a doctor". Therefore, at the beginning of the purchase of waste tire cracking equipment, it is necessary to choose a good brand and good quality to avoid such problems.

solution

So what if there is already excess water in the cracked waste tire oil? In fact, you can first stand treatment, after all, the density of water and oil is not the same, and the oil and water will be separated after a period of static precipitation. For those small amount of oily wastewater, atomization incineration can be used to separate the oil-containing wastewater of tire cracking. For example, in the combustion chamber of the waste tire cracking equipment in Dongying, Henan Province, atomizing nozzle facilities are added to spray oil-bearing wastewater into the cracking furnace combustion chamber after atomizing treatment, which not only solves the problem of wastewater discharge, but also recyles the part of wastewater. In addition, the condensation system of Dongying waste tire cracking equipment is made of Q235 steel plate, also known as A3 steel. Q235 is low carbon steel, has good plasticity and welding properties, molding ability is very good, and has a certain strength, good practical performance.

The above is a detailed answer to the question of "Why there is water in cracked waste tire oil", if you have any questions, you can contact us in Henan Dong Ying, our Henan Dong Ying waste tire cracking oil process is already very mature, with 13 years of experience, the production of waste tire cracking equipment not only a large amount of oil, but also high quality. Whether it is pre-sale or after-sales, we will give you a good experience!